Lonsdor K518ISE Program BMW CAS2 528i Remote Key

Lonsdor K518ISE key programmer has successfully programmed a remote key on a BMW 528i CAS2 immobilizer system via OBD2.

 

Procedure:

Connect K518 host with vehicle via OBD diagnostic socket

Turn on K518 key programmer

Insert working key and press Start button

Select Immobilizer->BMW->Immobilizer->CAS2/CAS3->Program key

Press OK to continue

Press Start button once

Lonsdor k518 will read BMW CAS and remote key information

Remove key from ignition switch

For smart key, take it outside the car

Reading key information

Select Key Position 4 and click on OBD Generation

If the key is an original key, please pre-process first, if the key has been programmed but failed, please do key unlocking and CAS key data backup fisrt

Select key type: Remote key

Insert key to be programmed into Lonsdor K518ise key slot (to identify the key is legal and to pre-process key)

Detecting key

Key is legal

Insert key to be programmed into car slot

Writing key

If for remote or smart key, please complete following steps:

1.Take away the key from ignition switch

2.Insert key into ignition switch again

3.Press Start button

If vehicle can not start, or direction lock icon displays on the dash, please sync ELV or DME accordingly.

Program complete.

Test the remote control and start car.

http://www.obdii365.com/