Program 2018-2022 Toyota Camry 8A All Keys Lost by Lonsdor ADP Adapter

How-to: Programming Toyota Camry 2018-2022 (All Keys Lost) with Lonsdor K518ISE & Lonsdor ADP Adapter bypass pin. No need NAFTS.

All keys lost requires LKE emulator as well.

Make a connection

Follow k518 instruction to connect ADP adapter with vehicle and connect PIN cable with PEPS module

In K518ISE menu, go to Immo & Remote- Toyota- Select from type- All smart key lost (2016-)- 8A

2. Backup Immo data

Select Backup immo data function

Detect serial number

Calculating and save data

Backup immo data successfully.

Reconnect the original car cable

Connect k518ise with vehicle via obd socket
Insert the LKE emulator into k518 key slot

Load backup data to generate an emergency key in AKL situation.
This function requires network connection

Select the backup data

The emulator can start the car

3. Add smart key

Select Add smart key function

Turn on ignition switch

Put an emulator key close to the ignition switch and turn on ignition till the dashboard turns on

Put the back side of the registered key close to the start button, when buzzer rings once remove the key

turn ignition off and turn on emergency indicators
Load PEPS DFlash file to acquire 12-Digit PIN

Select dflash file again

Lonsdor K518 detected keys have been registered, and up to 5 keys can be registered.
1). Hold the registered smart key’s back or generated emergency key closer to the Start button, the buzzer beeps once,
2). Hold the smart key to be registered back closer to Start button, the buzzer beeps twice, then remove the key from the button

Keys have been registered