Here’s the detail guide on programming a smart key on a Renault Koleos 2011 with Lonsdor K518 key programmer.
Key information:
Original key: 4-button smart key
Frequency: 433MHz
Chip Type: 46 chip
Car slot: in front of the shift lever
Disassemble component: BCM under steering wheel
Device to read BCM eeprom: Xhorse VVDI Prog programmer
Device to program smart key: Lonsdor K518ISE key programmer
Step 1: Remove BCM
Disassemble BCM immo box and find CPU chip XDT384
Step 2: Read EEPROM data with VVDI Prog
Open VVDI-Prog software
Select Renault-BCM-XDT384
Follow vvdi programmer wiring diagram to connect
Read eeprom data and save data to bin format
Connect K518 host with laptop via USB cable
You will see “customfile” folder on K518 software
Copy the eeprom bin file to “customfile” folder
Step 3: Program Smart Key
Re-install BCM from car
Connect Lonsdor K518 key programmer with vehicle via diagnostic socket
Select Renault->By System->Smart Key->Immobilizer system 2->Program smart key
Press on the Start button, press YES to continue
Open the door on driver side
Lonsdor K518ISE shows unable to identify pin code automatically.
Follow guides below: (We have done 1 and 2)
- Connect K518 host with laptop via USB cable. You’ll see “customfile” folder
2. Copy eeprom bin file to “customfile” folder
3. select eeprom bin file on “customfile” folder
Select Renault BCM data.bin
Insert a new smart key to be programmed into the card slot
Configuring system
Program success. Press YES to program next key
Insert next smart key into card slot
Program success.
Remove smart key
Key learning success
Done.
Related Posts
Lonsdor K518 Pro Update Audi IMMO on Nov. 18th, 2024
Lonsdor K518 Pro Volvo S60 AKL OBD Takes Few Hours?
Lonsdor K518 Adds Volvo XC60 2013 CEM Key
Lonsdor K518 Pro Jaguar 2019 New Type Smart Key Keyless Not Working?
How to Add Porsche Macan 2018 Key with MLB Tool & Lonsdor K518 Pro
Lonsdor K518 Volvo CEM Asks for 10 Digits Pin Code?