Lonsdor K518ISE Program 2014 Chevrolet Impala Keyless Entry Remote

2014 Chevrolet Impala keyless entry remote programming by Keydiy NC series remote using Lonsdot K518ISE key programmer.

including pin code reading.

lonsdor-k518-2014-impala-15

Step 1: Generate remote using Keydiy KD-X2

Put original key into KD-X2 remote maker, identify chip: 46 chip

lonsdor-k518-2014-impala-2

Remote Programming->Chevrolet->select remote 2011-2014 Cruze 433MHz multifunction

Click on Generate Remote

lonsdor-k518-2014-impala-3

lonsdor-k518-2014-impala-4

lonsdor-k518-2014-impala-5

Generate remote success

lonsdor-k518-2014-impala-6

Step 2: Read Pin code with Lonsdor K518ISE

Connect K518 host with vehicle via OBD socket

Select Chevrolet->Read Pin Code->Read pin code type5

lonsdor-k518-2014-impala-7

lonsdor-k518-2014-impala-8

lonsdor-k518-2014-impala-9

Turn on ignition switch

Identify VIN

lonsdor-k518-2014-impala-10

Read pin code success

 

Step 3: Program key with Lonsdor K518

Select Chevrolet->enter from Cruze->Immobilizer->All keys lost

lonsdor-k518-2014-impala-11

lonsdor-k518-2014-impala-12

Close all doors and switch ignition on

lonsdor-k518-2014-impala-13

Enter 4-digit pin code to access

Configuring system, wait about 10 minutes

lonsdor-k518-2014-impala-14

Follow K518ISE prompts step by step and wait patiently
The progress is just like the Cruze

Succeed.

lonsdor-k518-2014-impala-16

Test the remote.

Done.

 

www.obdii365.com

error: www.obdii365.com