Lonsdor K518ISE key programmer has successfully read pin code and programmed key for vw glof 4.
Step 1: Read Pin Code
Connect Lonsdor K518 with vehicle via OBD socket
Select Immobilizer->VW->2th & 3th IMMO->Pin code reading->Dashboard
Downloading application
Turn ignition switch on
Start reading pin code and verifying immobilizer
Read pin code success
Step 2: Program key
Select Immobilizer function
Turn ignition on
Turn ignition off and on
Insert a working key to switch ignition on
Communicating
Lonsdor K518ISE requires to enter 5-digit pin code to access and confirm
Login success
Select program channel 21
Enter number of keys to be programmed: 2
Switch ignition off
Insert all keys and turn ignition on for at least 5 sec one by one. When complete all keys, press OK to finish key programming.
Test remote and start car.
Done.
