Guide to add a smart key on Kia Sorento 2014 with SKP1000 key programmer by OBD.
Key information:
Original key: 3-button smart key
Frequency: 433MHz
Chip: 47 chip
Start: One button Start-stop
Slot: Without slot
Pin Code: calculate by VIN
Device: SKP1000 Tablet car key programmer
Procedure:
Connect SKP-1000 with vehicle via OBD diagnostic socket
Turn ignition ON
Go to Immobilizer function and select Kia brand
Select Smart key
Select By System
Select Smart System 6 (New type without slot)
Select Without slot
Choose OBDII Connector
Turn ignition switch to OFF position
Open and close the door before communication
SKP1000 auto key programmer will prompt to enter 6-digit pin code
Press on the Start button with original smart key vertically within 5 seconds
Press YES to continue
Programming…
Press on the Start button with the smart key vertically
Register smart key success. Continue to program next key?
Press YES to continue
Press on the Start button with a new smart key vertically within 5 seconds
Program key success!
Press NO to go back
Test the new smart key.
Done!