SKP1000 Program Jaguar S-type All Keys Lost by OBD

There’s hardly any OBD tool that will program all keys lost for Jaguar. The new SKP1000 key programmer will do.  Here is the demo example on programming Jaguar S-type remote key when all keys lost via OBD.

 

(Note: The document is in Chinese, SKP1000 supports both Chinese and English.)

skp1000-jaguar-s-type-1

  1. Program chip key

skp1000-jaguar-s-type-2

Select Immobilizer system 3

(Check above SKP1000 available Jaguar models, Immo system 1, Immo system 2,Immo system 3, F-type 2014 up, XF smart card (X250),XJ smart card 2013 up, XF smart card pre-2012, XJ smart card pre-2012).

skp1000-jaguar-s-type-3

Select Immobilizer

skp1000-jaguar-s-type-4

Select OBDII connector

Turn ignition switch to ON position

Press Yes to continue

skp1000-jaguar-s-type-5

Turn ignition OFF then turn it ON

Press Yes to continue

skp1000-jaguar-s-type-6

Current key number: 2

skp1000-jaguar-s-type-7

Turn ignition OFF and turn it ON

Press YES to continue

skp1000-jaguar-s-type-8

Select All keys lost (always select this option in case add key or program all keys lost)

skp1000-jaguar-s-type-9

All keys lost requires at leased 2 remote keys, otherwise will fail to program

Click on YES to continue

skp1000-jaguar-s-type-10

Change next key and turn ignition to ON

Press YES to continue

skp1000-jaguar-s-type-11

Insert first key into slot, turn ignition ON for 2 seconds

skp1000-jaguar-s-type-12

Insert second key, turn ignition ON for 2 seconds

press YES to continue

skp1000-jaguar-s-type-13

Follow procedure above (insert key and IGN ON fro 2 seconds) if you need program more keys

Click NO to go back

skp1000-jaguar-s-type-14

Check if the immobilizer indicator (red) flashes

 

2. Program remote

skp1000-jaguar-s-type-15

Select Automatic

skp1000-jaguar-s-type-16

Select Remote control system

skp1000-jaguar-s-type-17

Select OBDII connector

Turn ignition to ON position

Press YES to continue

skp1000-jaguar-s-type-18

Select Delete remote

skp1000-jaguar-s-type-19

Turn ignition OFF

All remote control have been deleted, press YES to continue

skp1000-jaguar-s-type-20

Delete success

skp1000-jaguar-s-type-21

Turn ignition OFF

Maximum 4 keys is able to be programmed

Press YES to continue

skp1000-jaguar-s-type-22

Press on the first remote

skp1000-jaguar-s-type-23

SKP-1000 shows first remote key ID

Press YES to continue

skp1000-jaguar-s-type-24

Press on the second remote

skp1000-jaguar-s-type-25

SKP1000 tablet car key programmer displays second remote key ID

Program remote success.

Press NO to go back

Test the new remotes.

Done!

 

Related post:

SKP1000 Program Freelander2 2012 smart card by OBD

error: www.obdii365.com