SKP1000 Program Suzuki S-Cross Smart Key All Keys Lost by OBD

Here’s the demo guide to program smart key on a Suzuki S-Cross when all keys lost with SKP1000 key programmer by OBD.

Key information:

Original key: 3-button smart key

Chip type: 46 chip

Frequency: 315MHz

Pin code: required

Device to program: SKP 1000 tablet auto key programmer

Guide:

Step 1.Get Pin Code

To get pin code, you need ID code and VIN.

To read ID code, you need to switch ignition to turn on the dashboard. But all keys have lost, so cannot turn on dash.

Here’s a way:

Connect IG1 SIG 7.5A on the immo box (located on the left of the driver side) to a 12V power supply to enable/force dash indicators turn on

You can read ID code when dash lights turn on

Check out 8-digit pin code according to ID code and VIN

Step 2: Program Key

Follow SKP1000 prompt to enter pin code program

All keys will be deleted, press YES to continue programming

Stick smart key to Start button but not start engine

(If start the engine, dash indicator will go off. In this case, you can follow method above to power it on again)

Program key success.

Press YES to program next key, press NO to go back.